TM-5-5420-279-10
(Combination deck unit 3)
Figure 10. 6 Deck Unit No. 3 Pulley
10.4.5.5
Fit the pulley shaft (13) complete with rope guards (12 and 17) and pulley assembly
to the combination deck unit (3).
10.4.5.6
Secure the pulley shaft with the washer (15) and a new Nyloc nut (16).
10.4.5.7
Locate the combination deck unit (3) on the bridge module.
10.4.5.8
Carry out steps 10.4.5.2 through 10.4.5.3 on all hinge assemblies.
10.4.5.9
Fit the closing sling cable to the pulley assembly (14).
10.4.5.10
Fit the pin (11) through the rope guards (12 and 17).
10.4.5.11
Fit the split pin (10).
10.4.5.12
Install the upper damper mounting in accordance with TM-5-5420-279-23
Maintenance Manual.
10.4.5.13
Check the operation of the bridge module.
10-13
