TM-5-5420-279-10
10.3.1 Coverage
10.3.1.1
This task covers:
a.
Removal
b.
Service/repair
c.
Installation
Tools Required
Tool Kit, General Mechanic's, Automotive (GMTK).
Equipment Conditions
Power removed from launch vehicle.
10.3.3.1
To replace the hand lever light filament, unscrew the two securing bolts (1) from
protective cover (2).
10.3.4 Service/repair
10.3.4.1
Unscrew the filament lamp by turning it counter-clockwise 90degrees.
10.3.4.2
Replace filament lamp with lamp of the same type and rating.
10.3.5 Installation
10.3.5.1
Screw protective cover (2) back into place.
10.3.5.2
Fit the two securing bolts to secure the protective cover in place.
Figure 10. 3 Hand Lever Light Assembly
