TM 5-5420-280-10
0007 00
PALLET CONTROLS AND INDICATORS (Contd)
AZ
PALLET HOLD-DOWN BAR -- The pallet hold-down bar is lowered from
it's stowed position by swinging the bar up, depressing the lever on the hook,
and removing the hook from the stowage cleat on the longitudinal girder. The
hold-down bar is connected to the CBT towing shackle by depressing the lever
on the hook until the shackle passes into the hook and the lever closes. The
hold-down bar is tightened by turning the turnbuckle to the right using
2 in. (50 mm) BII wrench. When turnbuckle is tight, hold turnbuckle with the
same wrench and tighten jamnut by turning it to the left using
1 5/8 in. (41 mm) BII combination wrench.
STOWAGE CLEAT
AZ
PALLET HOLD-DOWN BAR, STOWED POSITION
AZ
CBT TOWING
SHACKLE
PALLET HOLD-DOWN BAR, CONNECTED TO CBT
0007 00-22
