TM 5-5420-280-10
0029 00
MANUALLY UNLOADING PALLET TO GROUND (Contd)
NOTE
Perform steps 2 through 8 if pallet electrical and
hydraulic systems are connected to the CBT.
2. Disconnect power cable (2) from NATO slave receptacle (1), located on front
fender (4) or CBT battery box (5), and install dust cap (3) on NATO slave
receptacle (1).
1
2
3
4
SLAVE RECEPTACLE,
LEFT FRONT FENDER LOCATION
5
1
3
2
SLAVE RECEPTACLE,
BATTERY BOX LOCATION
0029 00-2
