TM 5-5420-280-23&P
0083 00
PIN WHEEL DRIVE GEAR REPLACEMENT (Contd)
REMOVAL
NOTE
Removal and installation of front and rear pin wheel drive gears
are performed the same way. Forward pin wheel drive gear is
shown.
1.
Remove screw (8) and washer (7) from pin wheel drive gear (1) and output drive gear (6) on gear
box (5).
2.
Pull pin wheel drive gear (1) off key (2) and output drive gear (6) on gear box (5).
3.
Remove key (2) from output drive gear (6).
4.
Remove spacer washer (3) and oil slinger (4) from output drive gear (6) and gear box (5).
INSTALLATION
1.
Install oil slinger (4) and spacer washer (3) on output drive gear (6) and gear box (5).
2.
Install key (2) on output drive gear (6).
3.
Press pin wheel drive gear (1) on output drive gear (6) and key (2).
NOTE
Ensure that all mounting hardware is tightened to metric
standards unless otherwise noted. Refer to metric torque limits in
4.
Apply a light coat of sealing compound (242) to threads of screw (8) and install washer (7) and screw
(8) on pin wheel drive gear (1) and output drive gear (6).
5.
Install bridge halves on bridge pallet. Refer to WP 0018 00.
4
2
3
1
5
8
7
6
END OF WORK PACKAGE
0083 00-2
