TM 5-5420-280-23&P
PALLET MAINTENANCE INSTRUCTIONS
RAPIDLY EMPLACED BRIDGE (REB)
NSN 5420-01-481-3959 P/N 12480471
WINCH ASSEMBLY REPLACEMENT
REMOVAL, INSTALLATION
INITIAL SETUP:
Personnel Required
Tools and Special Tools
Two
Forward Repair System (FRS)
(Table 1, Item 2, WP 0206 00)
Equipment Condition
Lifting device
Sling or chain
Winch wire rope removed.
Lifting eye (Item 15, WP 0159 00)
(Refer to WP 0057 00.)
Drain pan (Table 1, Item 2, WP 0206 00)
Winch guide rollers and rope track removed.
(Refer to WP 0058 00.)
Materials/Parts
Winch stowage drum and bracket removed.
(Refer to WP 0061 00.)
Sealing compound (242) (Item 16, WP 0205 00)
Winch electrical harness removed.
Four locknuts (WP 0158 00)
(Refer to WP 0065 00.)
Four locknuts (WP 0158 00)
Winch ground wire removed.
Lockwasher (WP 0158 00)
(Refer to WP 0065 00.)
Three O-rings (WP 0158 00)
CAUTION
Ensure pallet main power switch is in OFF position prior to
performing Winch Assembly Replacement. Failure to comply may
result in damage to equipment.
Change 1