TM 55-1945-205-10-2
0039 00 5
0039 00
h.
Bring the halves together so that the bearing surface arcs are on top of the shackle cheeks.
i.
Install bolt (26) and nut (25).
j.
Tighten nut (25) until snug.
k.
Install bolt (28) and nut (27).
l.
Tighten nut (27) until snug.
:,1*
127(
Disconnect the guillotine bar in the same manner as flexors to remove flexor
receiver insert. (WP 0051 00)
m. Using a forklift, forklift adaptor, sling and the flexor lifting device (23), remove each flexor receiver
insert (24) from the appropriate flexor pocket.
n.
Place flexor receiver insert (24) and attached mooring bridle (11) on the deck of the RRDF.
23
24
26
28
29
25
11
35
27
