TM 55-1945-205-10-2 0007 00 5 0007 00 4 SHIFTING AND SPEED Control Moving the handle forward moves the boat forward, center position is neutral, aft position moves the boat backwards. The farther the handle is moved forward, the faster the speed. The farther the handle is moved aft, the faster the speed in reverse. 5 START Key Turning the key clockwise starts the engine. Pushing in on the key during start primes the engine. Release the key when engine is running. 6 Emergency Stop Clip Attached to key and operator, stops engine when operator is thrown clear. 7 Steering Wheel Allows operator to steer boat using hydraulic steering. 8 TRAILERING TILT Switch Located on lower engine cover, operates the power tilt from outside the boat. 9 TRAILERING Bracket Locks the engine in the trailering position for transportation or movement of the boat. 10 TRIM Gauge Indicates the bow position that is achieved by trimming the angle of the motor. 11 SEARCH Light Switch Turns on the spotlight. 12 ACC 2 Not used. 13 HORN Button Operates the horn. 14 NAV LIGHTS/ANCHOR LIGHT SWITCH Operates the nav lights when in the up position and the anchor light when in the down position. 15 BILGE PUMP SWITCH Not used. 16 BILGE INDICATOR LIGHT Not used. 17 CIRCUIT BREAKER, Bilge Pump Not used. 18 CIRCUIT BREAKER, Anchor/Nav Lights 10 AMP Provides circuit protection for the anchor light/nav lights. 19 CIRCUIT BREAKER, Horn 10 AMP   Provides circuit protection for the horn. 20 CIRCUIT BREAKER, ACC 2 10 AMP Provides circuit protection for the ACC 2. 21 CIRCUIT BREAKER, Search 10 AMP Provides circuit protection for the search light. 22 WATER Pressure Gauge Indicates the water pressure of the water cooling the motor. 23 Tachometer Indicates the revolutions per minute of the motor. Table 2.   Rigid Hull Inflatable Boat Operator Controls and Indicators. (Continued) KEY CONTROL/INDICATOR FUNCTION