TM 55-1945-205-10-2
0007 00 9
0007 00
INCINOLET CONTROLS AND INDICATORS
Refer to Incinerator Toilet/Urinal Galley/Water Heater TM 55-1925-257-14&P.
Table 4. Personnel Shelter Heating and Air Conditioning System and Electrical
Distribution Panel Board Operator Controls and Indicators.
KEY
CONTROL/INDICATOR
FUNCTION
1
FAN Switch
Selects mode of operation for fan. When in the ON position, fan
operates continuously. When in the AUTO mode, fan operates in
conjunction with the thermostat.
2
Thermostat Adjustment
Adjust the temperature at which the heating or cooling system will
cycle on.
3
Mode Selector Switch
Selects the mode of operation for the heating and cooling system.
In the COOL mode, the air conditioning system will cycle on at
the thermostat setting. In the HEAT mode, the heating system will
cycle on at the thermostat setting. In the OFF mode, the system
does not operate.
4
CIRCUIT BREAKER “A”
Provides circuit protect for heating and air conditioning system.
Rated at 25 amps.
5
CIRCUIT BREAKER “B”
Provides circuit protect for receptacles. Rated at 20 amps.
6
CIRCUIT BREAKER “C”
Provides circuit protect for overhead lighting. Rated at 15 amps.
7
CIRCUIT BREAKER “D”
Provides circuit protect for toilet lighting and ventilation. Rated at
15 amps.
8
CIRCUIT BREAKER “E”
Provides circuit protect for charger receptacle. Rated at 20 amps.
9
CIRCUIT BREAKER “F”
Provides circuit protect for Incinolet toilet. Rated at 20 amps.
10
CIRCUIT BREAKER “SPARE”
Spare circuit. Rated at 15 amps.
11
CIRCUIT BREAKER “SPARE”
Spare circuit. Rated at 15 amps.
12
CIRCUIT BREAKER “SPARE”
Spare circuit. Rated at 15 amps.
13
MAIN CIRCUIT BREAKER
Allows the operator to turn off all electrical power to electrical
distribution panel board. Rated at 100 amps.
