TM 55-1945-205-10-2
0009 00 2
0009 00
a.
Insert crowbar (2) behind the spring bar (3) under the female guillotine bar (1).
b.
Rotate the crowbar (2) downward to clear spring bar (3) from deck overhangs (4) and allow the female
guillotine bar (1) to move upward.
c.
Raise the female guillotine bar (1) approximately 6 in. until it stops.
2.
Raise the male guillotine bars (5).
a.
Insert crowbar (2) behind the spring bar (6) under the male guillotine bar (5).
b.
Rotate the crowbar (2) downward to clear spring bar (6) from deck overhangs (7) and allow male guillotine
bar (5) to move upward.
127(
Personnel should hear two clicks as both pins extend or, if the module is in the water,
personnel should see the first pin extend and continue to pull up until one can hear or feel
the second lower pin extend.
c.
Raise the male guillotine bar (5) approximately 6 in. until it stops, allowing male connector pins to
fully extend.
3
2
1
4
2
5
6
7
