TM 55-1945-205-10-20010 00 20010 00a.Place nut (2) in slot in the tailpiece (3) of the D-Ring/Cloverleaf fitting (1).b.Insert D-Ring/Cloverleaf fitting (1) into module turn tube (4).:,1*Beware of other craft or objects coming alongside while working outboard installing the bolt and washer. Serious injury may result if body parts are crushed between module and other craft or objects.Use extreme caution while working outboard and lifting heavy objects as the possibility of falling overboard exists, which could cause serious injury or death.c.Insert bolt (5) through keeper plate (6) and thread it into nut (2) in tailpiece (3).d.Tighten bolt (5) securely.2.Install deck cleat fitting (7) on modules.a.Place nut (8) in slot in the tailpiece (9) of the deck cleat fitting (7).b.Insert deck cleat fitting (7) into module turn tube (10).:,1*Beware of other craft or objects coming alongside while working outboard installing the bolt and washer. Serious injury may result if body parts are crushed between module and other craft or objects.Use extreme caution while working outboard and lifting heavy objects as the possibility of falling overboard exists, which could cause serious injury or death.c.Insert bolt (11) through keeper plate (12) and thread it into nut (8) in tailpiece (9).d.Tighten bolt (11) securely.END OF WORK PACKAGE
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
