TM 55-1945-205-10-4
0099 00 6
0099 00
WARNING
Use approved procedures when cleaning up fuel spills. Take proper precautions
when removing or installing any fuel system component. Failure to comply may
result in serious injury to death to personnel.
2
Before
.4
Light Tower Engine
(Cont’d)
2. Check fuel system.
a. Check for leaks around fuel
tank and fuel lines. If leaks are
found, contact unit maintenance.
Class I fuel leakage
is found.
b. Examine fuel lines and
flexible hoses for leaks. Check
that fittings, clamps and ties are
secure. Hoses must not be resting
on or touching shafts, couplings,
heated surfaces, sharp edges or
other areas that might sever or
rupture fuel system parts. If fuel
leaks, fittings, clamps and ties
are not secure or hoses are
resting on or touching shafts,
couplings, heated surfaces or
sharp edges, contact unit
maintenance.
Class I fuel leakage
is found.
WARNING
c. Verify fuel tank is full by
checking sight level or using a
fuel stick. If necessary, add fuel.
DO NOT OVER FILL. Service
with diesel fuel, Summer Grade,
DF-2 from -25°F to +150°F. Tank
capacity is 30 gallons (114 liters).
Fill to 95%.
Table 1. Preventive Maintenance Checks and Services. (Continued)
ITEM
NO.
INTERVAL
MAN-
HOURS
ITEM TO BE
CHECKED OR
SERVICED
PROCEDURE
EQUIPMENT
NOT READY/
AVAILABLE IF:
