TM 55-1945-205-24-2
0316 00 7/8 blank
0316 00
17. To adjust float drop, turn carburetor assembly over so float drops and proceed as follows:
a.
Using a mechanics rule, verify the distance (22) from the lower surface of the of the carburetor body (23) to
a line parallel to the lowest point on the float (24) (1-1/8 in. - 1-5/8 in), (28 - 41 mm).
b.
Adjust float lever tab (25) to obtain proper float drop.
18. Turn carburetor assembly over onto top cover.
19. Install new float bowl gasket (13) and float chamber (9).
WARNING
20. Apply sealing compound to threads of the four float bowl screws (8).
21. Install four screws (8) and tighten.
22. Using a torque wrench, tighten screws (8) in criss-cross configuration, to 25 - 35 in. lbs (2.8 - 4.0 N-m).
END OF WORK PACKAGE
22
23
24
25
