TM 55-1945-205-24-2
0316 00 5
0316 00
ASSEMBLE RHIB ENGINE CARBURETOR
CAUTION
Repair kit contains parts for three engine models. Ensure replacement parts used
are correct for this model. Failure to comply may damage parts.
NOTE
All parts must be completely clean before assembly.
1.
Inspect all new gaskets for loose gasket material and fibers. Remove prior to installation.
2.
Choose a flat face punch with a diameter slightly smaller than the plug opening and a plastic mallet and proceed
as follows:
a.
Position carburetor body (18) to access core plug opening (17).
b.
Position plug (17) on body (18) so it resembles a dome over the opening.
c.
Center punch on dome of core plug (17).
d.
Strike punch with mallet to seat core plug (17).
WARNING
e.
Once seated, apply sealing compound around the edge of core plug (17).
3.
With body (18) up turned, install preformed packing (14) over pick up tube.
4.
Install new float valve and seat assembly (12).
18
17
PUNCH
