TM 55-1945-205-24-2
0320 00 2
0320 00
2.
Remove top mounting clamp screw (1).
3.
Remove bottom mounting clamp screw (2) and ground lock washer (3).
4.
Tag and remove solenoid ground wire (4).
5.
Remove clamp (5) and primer solenoid (6).
6.
Tag and remove hoses (7 and 8) from primer solenoid (6).
7.
Remove tiedown strap (9) from hose (10) and discard tiedown strap.
8.
Tag hose (10) and remove from primer solenoid (6).
9.
Tag and disconnect purple/white lead (11) from engine.
INSTALL RHIB ENGINE FUEL PRIMER SOLENOID
1.
Connect purple/white lead (11) to engine and remove tag.
2.
Install hose (10) on primer solenoid, remove tag and secure with new tiedown strap (9).
3.
Install hoses (7 and 8) on primer solenoid (6) and remove tags.
4.
Install ground lock washer (3) and ground wire (4) on screw (2).
5.
Place clamp (5) on primer solenoid (6) and install bottom mounting screw (2) with washer (3) and
ground wire (4) in clamp and remove tag.
6.
Install primer solenoid (6) and clamp with screw (2) on engine mount and tighten screw.
7.
Install top clamp screw (1) and tighten.
8.
Install the correct test propeller and place the engine in a test tank.
2
3
4
5
9
8
10
7
6
1
11
