TM 55-1945-205-24-2
0326 00 7/8 blank
0326 00
l.
Connect oil inlet hose (19) to lower housing cover (20) and secure hose clamp (21).
m. Remove cap holder (22) from end of the pickup hose (18).
n.
Install the pickup hose (18) from the bottom of the pickup assembly and secure with hose clamp (17).
o.
Install pickup assembly (14) in top of oil reservoir (15) and secure with four screws (13). Tighten screws (13).
5.
Install RHIB engine cover. (WP 0297 00)
WARNING
6.
Clean up spilled fluid with spill kit and dispose of spill kit waste in accordance with local procedures.
END OF WORK PACKAGE
