TM 55-1945-205-24-2
0065 00 1/2 blank
0065 00
UNIT LEVEL MAINTENANCE
ROLL-ON/ROLL-OFF DISCHARGE FACILITY
COMBINATION BEACH/SEA END SECTION NON-POWERED
MODULE FLEXOR ASSEMBLY
INSPECTION
INITIAL SETUP:
Tools
Tool Kit, General Mechanics (Rail and Marine) (Item 82, WP 0359 00)
Gloves, Mens and Womens (Leather Palm) (Item 27, WP 0359 00)
Goggles, Sun, Wind and Dust (Safety) (Item 29, WP 0359 00)
Helmet, Safety (Brown) (Item 33, WP 0359 00)
Life Preserver, Vest (Item 38, WP 0359 00)
Personnel Required
Seaman 88K
INSPECT COMBINATION BEACH/SEA END SECTION NON-POWERED MODULE
FLEXOR ASSEMBLY
WARNING
All personnel must wear personal flotation device, hard hat, safety shoes and gloves
during RRDF operations and maintenance. Failure to observe these precautions
could result in serious injury or death.
NOTE
The following procedure is typical for all flexors.
1.
Inspect uninstalled flexors (1) for separation of the polyurethane material (2) in the center. If found, replace
flexor (1).
2.
Inspect uninstalled flexors (1) for cracks in the external weldments (3) on the ends. If found, replace flexor (1).
3.
Inspect installed flexors (1) for separation of the polyurethane material (2) in the center. If found, replace
flexor (1) after the exercise or operation is completed.
4.
Inspect installed flexors (1) for cracks in the external weldments (3) on the ends. If found, replace flexor (1).
END OF WORK PACKAGE
1
3
3
2