TM 55-1945-205-24-2
0161 00 1
0161 00
DIRECT SUPPORT MAINTENANCE
ROLL-ON/ROLL-OFF DISCHARGE FACILITY
LIGHT TOWER BALLAST BOX COVER
REPLACEMENT
INITIAL SETUP:
Tools
Tool Kit, General Mechanics (Item 81, WP 0359 00)
Gloves, Mens and Womens (Leather Palm) (Item 27, WP 0359 00)
Goggles, Sun, Wind and Dust (Safety) (Item 29, WP 0359 00)
Helmet, Safety (Brown) (Item 33, WP 0359 00)
Life Preserver, Vest (Item 38, WP 0359 00)
Materials/Parts
Cover, Ballast Box
(33968)
PN 36894285
Personnel Required
Interior Electrician 51R
Equipment Condition
Light Tower Battery Negative Lead Terminal Removed. (WP 0134 00)
Light Tower Control Panel Hour Meter Removed. (WP 0147 00)
Light Tower Control Panel Fuel Gage Removed. (WP 0148 00)
Light Tower Control Panel Duplex Outlet Removed. (WP 0149 00)
Light Tower Control Panel Twist Lock Outlet. (WP 0150 00)
Light Tower Control Panel Main Circuit Breaker Removed. (WP 0151 00)
Light Tower Control Panel Toggle Switches Removed. (WP 0152 00)
Light Tower Control Panel 125 Volt Breaker Removed. (WP 0153 00)
Light Tower Control Panel Key Switch Removed. (WP 0154 00)
Light Tower Control Panel Removed. (WP 0163 00)
Light Tower Ballast Box Panel End Removed. (WP 0160 00)
REMOVE LIGHT TOWER BALLAST BOX COVER
WARNING
All personnel must wear personal flotation device, hard hat, safety shoes and gloves
during RRDF operations and maintenance. Failure to observe these precautions
could result in serious injury or death.
1.
Remove nine hex head bolts (1) from ballast box (2) and ballast box cover (3).