TM 55-1945-205-24-2
0164 00 2
0164 00
WARNING
3.
Spray all switch contacts and connectors with electrical contact cleaner.
WARNING
4.
Cycle the switches through all possible positions, spraying electrical contact cleaner at each position.
5.
Leave the control box open until completely dry.
INSPECT LIGHT TOWER GENERATOR CONNECTIONS
1.
Inspect generator switch contacts and connectors for looseness. Tighten as required.
2.
Inspect generator switch contacts and connectors for cracked or broken insulation or bare wires.
Replace defective parts.
3.
Inspect generator switch contacts and connectors for evidence of arcing on electrical terminals. Repair or replace
defective parts.
4.
Inspect generator switch contacts and connectors for corrosion. If found, clean as required.
5.
Install light tower battery negative lead terminal. (WP 0134 00)
END OF WORK PACKAGE
