INSTALL VALVE COVER

LIGHT TOWER ENGINE VALVE COVER - TM-55-1945-205-24-2_579

LIGHT TOWER ENGINE VALVE COVER - TM-55-1945-205-24-2_581

TM-55-1945-205-24-2 Modular Causeway System (MCS) Roll-On/Roll-Off Discharge Facility Model (RRDF) RRDF-1 NSN 1945-01-473-2282 Manual
Page Navigation
471

TM 55-1945-205-24-2 0189 00 2 0189 00 2. Remove three hex head cap nuts (3) and gaskets (4) from valve cover (2). Discard gaskets (4). 3. Remove valve cover (2) from cylinder head (5). 4. Remove valve cover gasket (6) and discard. INSTALL VALVE COVER WARNING 1. Using cleaner and putty knife, clean the gasket surface area on the cylinder head (5) and valve cover (4). 2. Install new valve cover gasket (6) in valve cover (4). 3. Install valve cover (2) on cylinder head (5). 4. Install three new gaskets (4) on valve cover (2). 5. Install three hex head cap nuts (3) in valve cover (2). 6. Torque hex head cap nuts (3) to 61.2 to 78 in. lbs (6.9-8.8 N-m). 7. Connect engine breather hose (1) to valve cover (2). 8. Install light tower battery negative lead terminal. (WP 0134 00) 9. Perform operational check of light tower. (TM 55-1945-205-10-2) END OF WORK PACKAGE 3 4 2 6 1 4 3 4 3 5

Privacy Statement
Press Release
Contact