TM 55-1945-205-24-2
0190 00 3/4 blank
0190 00
WARNING
3.
Dispose of contaminated wiping rags in accordance with local procedures.
INSPECT LIGHT TOWER ENGINE VALVE COVER
1.
Inspect oil filler plug (1) for cracks or damaged threads, replace as necessary.
2.
Inspect valve cover (2) for cracks, dents, warping or any damage that may cause leaking or interfere with the
normal operation of the engine, replace as necessary.
3.
Inspect breather oil shield (6) for cracks, dents, or warping. Replace as necessary.
4.
Inspect lower breather plate (7) for cracks, dents, or warping. Replace as necessary.
5.
Inspect upper breather plate (9) for cracks, dents, or warping. Replace as necessary.
ASSEMBLE LIGHT TOWER ENGINE VALVE COVER
1
Install upper breather plate (9).
2.
Install new breather element (8).
3.
Install lower breather plate (7).
4.
Install breather oil shield (6).
5.
Position two lock washers (5) under breather oil shield (6).
6.
Install two hex head bolts (4) through lock washers (5) and breather oil shield (6). Tighten hex head bolts (4).
7.
Install new o-ring (3) on oil filler plug (1).
8.
Install oil filler plug (1) on the valve cover (2).
9.
Install light tower engine valve cover. (WP 0189 00)
10. Install light tower battery negative lead terminal. (WP 0134 00)
END OF WORK PACKAGE
