INSTALL LIGHT TOWER PINTLE AND BRACKET

LIGHT TOWER DRAWBAR PINTLE AND BRACKET - TM-55-1945-205-24-2_619

LIGHT TOWER RAISE/LOWER WINCH CABLE - TM-55-1945-205-24-2_621

TM-55-1945-205-24-2 Modular Causeway System (MCS) Roll-On/Roll-Off Discharge Facility Model (RRDF) RRDF-1 NSN 1945-01-473-2282 Manual
Page Navigation
507

TM 55-1945-205-24-2 0200 00 2 0200 00 3. Place wire bundle (7) and wire bundle clamp (8) out of the way. 4. Remove the nut (9), washer (10) and bolt (11) securing the pintle (12) to the pintle bracket (5). 5. Remove and discard the pintle (12) and bracket (5). INSTALL LIGHT TOWER PINTLE AND BRACKET 1. Position new pintle bracket (5) on end of drawbar (6). 2. Install two bolts (4) through the drawbar (6) and pintle bracket (5). 3. Install wire bundle (7) and clamp (8) on bolt (4). 4. Install two washers (3) and nuts (2) on bolts (4). Tighten nuts (2). 5. Position new pintle (12) against pintle bracket (5). 6. Install bolt (11) through pintle bracket (5) and pintle (12). 7. Install washer (10) and nut (9) on bolt (11). Tighten nut (9). END OF WORK PACKAGE

Privacy Statement
Press Release
Contact