TM 55-1945-205-24-2
0007 00 2
0007 00
MALFUNCTION
Lamp optical/socket assembly is damaged or defective.
CORRECTIVE ACTION
Repair lamp optical/socket assembly. (WP 0158 00)
Perform operational check of light tower engine. (TM 55-1945-205-10-2)
MALFUNCTION
Light tower electrical system junction box is damaged or defective.
CORRECTIVE ACTION
Replace light tower electrical system junction box. (WP 0137 00)
Perform operational check of light tower engine. (TM 55-1945-205-10-2)
MALFUNCTION
Open circuit between 125V receptacle located on front end panel and ballast box.
CORRECTIVE ACTION
Using a multimeter, check for 120 VDC at 125V receptacle.
If 120 VDC is present, use a multimeter to check continuity of wiring between 125V
receptacle and ballast(s) in ballast box. If continuity is not present, repair/replace wiring as
necessary. (WP 0348 00)
If 120 VDC is not present, replace defective ballast(s). (WP 0162 00)
Perform operational check of light tower engine. (TM 55-1945-205-10-2)
MALFUNCTION
Open circuit between ballast(s) and LAMP toggle switch(s).
CORRECTIVE ACTION
Using a multimeter, check for 120 VDC at LAMP toggle switch(s).
If 120 VDC is present, use a multimeter to check continuity of wiring between LAMP
toggle switch(s) and ballast(s). If continuity is not present, repair/replace wiring as
necessary. (WP 0348 00)
If 120 VDC is not present, replace LAMP toggle switch(s) on control panel. (WP 0152 00)
Perform operational check of light tower engine. (TM 55-1945-205-10-2)
