TM 55-1945-205-24-2
0249 00 3
0249 00
WARNING
9.
Lower rod end of hydraulic cylinder (2) onto wood block.
10. Using external retaining ring pliers, remove two retaining rings (8) from clevis pin (9).
11. Remove clevis pin (9) from cylinder mounting clevis (10).
12. Remove clevis (10) from mounting boss (11).
13. Remove clevis (6) and rod lock nut (13) from cylinder rod (12).
WARNING
14. Remove hydraulic cylinder (2) and discard.
WARNING
15. Remove drain pan and dispose of contents in accordance with local procedures.
INSTALL EASY DRAWER HYDRAULIC CYLINDER
NOTE
Ensure that clevis opening is parallel to body of hydraulic cylinder.
1.
Install clevis (6) and rod lock nut (13) on new hydraulic cylinder (2) rod (12). Tighten clevis (6).
2.
Position clevis (10) on mounting boss (11).
3.
Install clevis pin (9) in clevis (10).
4.
Using external retaining ring pliers, install two new retaining rings (8) in clevis pin (9).
