TM 55-1945-205-24-2
0250 00 3
0250 00
WARNING
4.
Tilt hose (5) and drain hydraulic fluid into drain pan.
5.
Position wood block under rod end of hydraulic cylinder (4).
6.
Using external retaining ring pliers, remove two retaining rings (6) from clevis pin (7).
7.
Remove clevis pin (7) from clevis (8).
8.
Remove clevis (8) from mounting boss (9).
9.
Lower hydraulic cylinder (4) onto wood block.
10. Using external retaining ring pliers, remove two retaining rings (10) from clevis pin (11).
11. Remove clevis pin (11) from clevis (12).
12. Remove clevis (12) from mounting boss (13).
13. Remove clevis (8) and rod lock nut (14) from cylinder rod (15).
WARNING
14. Remove hydraulic cylinder (4) and discard.
WARNING
15. Remove drain pan and dispose of contents in accordance with local procedures.