TM 55-1945-205-24-2
0257 00 1
0257 00
DIRECT SUPPORT MAINTENANCE
ROLL-ON/ROLL-OFF DISCHARGE FACILITY
EASY ANCHOR DRAWER WHEEL
REPLACEMENT
INITIAL SETUP:
Tools
Tool Kit, General Mechanics (Item 81, WP 0359 00)
Gloves, Mens and Womens (Leather Palm) (Item 27, WP 0359 00)
Goggles, Sun, Wind and Dust (Safety) (Item 29, WP 0359 00)
Helmet, Safety (Brown) (Item 33, WP 0359 00)
Life Preserver, Vest (Item 38, WP 0359 00)
Goggles, Industrial (Chipping, Chemical) (Item 28, WP 0359 00)
Respirator, Air Filtering (Item 59, WP 0359 00)
Gloves, Chemical (Item 25, WP 0359 00)
Pliers, Retaining Ring, Flat Jaw (Item 48, WP 0359 00)
Pan, Drain (Item 46, WP 0359 00)
Materials/Parts
Assembly, Wheel
(19207)
PN FCRRDF-99-581-001-65
Bearing, Sleeve
(39428)
PN 6391K285
Spill Clean-Up Kit, Hazardous Material (Item 50, WP 0358 00)
Cloth, Cleaning (Item 14, WP 0358 00)
Block, Shoring (6 in. X 6 in. X 30 in.) (Item 6, WP 0358 00)
Qty 9
Personnel Required
Engineer 88L
Equipment Condition
EASY Anchor Removed. (WP 0235 00)
REMOVE EASY ANCHOR DRAWER WHEEL
WARNING
All personnel must wear personal flotation devices, hard hat, safety shoes and
gloves during RRDF operations and maintenance. Failure to observe these
precautions could result in serious injury or death.
NOTE
The following procedure is typical for removal and installation of EASY
anchor drawer wheels.
1.
Position one wood block under drawer hydraulic cylinder (1) to support weight of the cylinder (1).