TM 55-1945-205-24-2
0257 00 2
0257 00
2.
Using external retaining ring pliers, remove two snap rings (2) from pin (3).
3.
Remove pin (3) from clevis (4).
4.
Remove clevis (4) from mounting boss (5) on slide platform (6).
5.
Position drain pan beneath bulkhead adaptor (7) in the slide platform (6).
WARNING
CAUTION
The lower slide platform hydraulic hose must be protected after removal to prevent
damage during drawer removal. Failure to comply could result in
damage to equipment.
6.
Disconnect lift platform lower hydraulic hose fitting (8) from bulkhead adaptor (7).
5
2
4
1
2
3
6
8
7
