TM 55-1945-205-24-2
0271 00 3
0271 00
SYNCHRONIZE THROTTLE PLATE
NOTE
Do not allow the cam follower to contact the throttle cam during this procedure.
1.
Loosen cam follower screw (9) and push cam follower (10) away from the throttle cam (11).
2.
Loosen upper carburetor linkage screw (12) and lower carburetor linkage screw (13).
3.
Verify all throttle plates are closed.
4.
While lightly applying upwards pressure to adjusting link tabs (13), tighten the lower (10) then the upper (11)
carburetor linkage screws.
ADJUST CAM FOLLOWER PICKUP
1.
Snap throttle link coupler shell (14) off throttle cam ball (15).
2.
While holding cam follower (16) against throttle cam (17), move throttle cam (17) until embossed mark (18) on
throttle cam (17) aligns with center of cam follower (16).
3.
Tighten cam follower screw (19).
9,10,11
12
13
20
21
14,15
16
17
18
19
