TM 55-1945-205-24-2
0281 00 7
0281 00
16. Using a pumice stone, buff the contact surface of seam tape (3).
WARNING
17. Apply glue.
a.
Apply a thin first coat of glue from repair kit to the inflatable tube (1).
b.
Apply a thin first coat of glue from repair kit to the contact surface of patch (2).
CAUTION
Glue drying times may vary due to temperature and humidity, ensure the glue is
tacky before applying second coat. Failure to comply could result in a failed patch
and cause damage to equipment.
c.
Allow the glue to dry for five to ten minutes or until tacky.
d.
Apply a thin second coat of glue from repair kit to the inflatable tube (1).
e.
Apply a thin second coat of glue from repair kit to the contact surface of patch (2).
CAUTION
Glue drying times may vary due to temperature and humidity, ensure the glue is
tacky before applying third coat. Failure to comply could result in a failed patch and
cause damage to equipment.
f.
Allow glue to dry for five to ten minutes. or until tacky.
g.
Apply a thin third coat of glue from repair kit to the inflatable tube (1).
h.
Apply a thin third coat of glue from repair kit to the contact surface of patch (2).
CAUTION
Glue drying times may vary due to temperature and humidity, ensure the glue is
tacky before applying the patch to the inflatable tube. Failure to comply could result
in a failed patch and cause damage to equipment.
i.
Allow the glue to dry for five to ten minutes or until tacky.
18. Using a fid, start from where seam tape was already glued and move inward to the cut in seam tape removing any
air bubbles that have formed under seam tape.
19. Select a patch 1½ in. larger than the width of the seam tape.
