TM 55-1945-205-24-2
0281 00 3
0281 00
WARNING
10. Apply glue.
a.
Apply a thin first coat of glue from repair kit to the inflatable tube (1).
b.
Apply a thin first coat of glue from repair kit to the contact surface of patch (2).
CAUTION
Glue drying times may vary due to temperature and humidity, ensure the glue is
tacky before applying second coat. Failure to comply could result in a failed patch
and cause damage to equipment.
c.
Allow glue to dry for five to ten minutes or until tacky.
d.
Apply a thin second coat of glue from repair kit to the inflatable tube (1).
e.
Apply a thin second coat of glue from repair kit to the contact surface of patch (2).
CAUTION
Glue drying times may vary due to temperature and humidity, ensure the glue is
tacky before applying third coat. Failure to comply could result in a failed patch and
cause damage to equipment.
f.
Allow the glue to dry for five to ten minutes or until tacky.
g.
Apply a thin third coat of glue from repair kit to the inflatable tube (1).
h.
Apply a thin third coat of glue from repair kit to the contact surface of patch (2).
CAUTION
Glue drying times may vary due to temperature and humidity, ensure the glue is
tacky before applying the patch to the inflatable tube. Failure to comply could result
in a failed patch and cause damage to equipment.
i.
Allow the glue to dry for five to ten minutes or until tacky.
11. Lay patch (2) on damaged area of inflatable tube (1) without pressing down on patch (2).
12. Adjust the position of patch (2) so that it is centered over damaged area.
13. Using a fid, start from the center of patch (2) and move outward removing any air bubbles that have formed
under patch (2).
14. Allow 12 hours for glue to dry before testing the inflatable tube (1) for air retention. (WP 0280 00)
