TM 55-1945-205-24-20285 00 10285 00DIRECT SUPPORT MAINTENANCEROLL-ON/ROLL-OFF DISCHARGE FACILITYRIGID HULL INFLATABLE BOAT HULLREPAIRINITIAL SETUP:ToolsTool Kit, General Mechanic’s (Item 81, WP 0359 00)Gloves, Chemical (Item 25, WP 0359 00)Goggles, Industrial (Chipping, Chemical) (Item 28, WP 0359 00) Respirator, Air Filtering (Item 59, WP 0359 00)Saw, Jig, Electric, Portable (Item 60, WP 0359 00)Blades, Jig Saw Metal Cutting, Fine Tooth (Item 7, WP 0359 00)Grinder, Pneumatic, High Speed (Item 30, WP 0359 00)Tape, Measuring (Item 74, WP 0359 00)Scissors, Ladies (Item 63, WP 0359 00)Materials/PartsKit, Fiberglass Repair(18731)PN 100370Acetone, Technical (Item 1, WP 0358 00)Rag, Wiping (Item 45, WP 0358 00)Disk, Abrasive (Item 17, WP 0359 00)Disk, Sanding, Coarse (Item 18, WP 0359 00)Block, Shoring (Item 6, WP 0359 00)Personnel RequiredEngineer 88LEquipment ConditionRHIB Dry-Docked.REPAIR RHIB HULL - TYPE 4 FIBERGLASS REPAIRWARNINGFiberglass dust is extremely abrasive. Areas near the repair must be covered and protected from fiberglass dust and resin. Respirators, gloves and goggles must be worn at all times. failure to comply may result in injury or death.NOTEType 4 repairs affect severe damage to cored hull laminate in structural areas.The repair area temperature should be controlled between 50° and 75°F (8° and 20°C) to ensure proper curing of the resins.1.Prepare damaged area.
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
