RIGID HULL INFLATABLE BOAT HULL - TM-55-1945-205-24-2

REPAIR RHIB HULL - TYPE 2 FIBERGLASS REPAIR

REPAIR RHIB HULL - TYPE 3 FIBERGLASS REPAIR

TM-55-1945-205-24-2 Modular Causeway System (MCS) Roll-On/Roll-Off Discharge Facility Model (RRDF) RRDF-1 NSN 1945-01-473-2282 Manual
Page Navigation
763

TM 55-1945-205-24-2 0284 00 1 0284 00 DIRECT SUPPORT MAINTENANCE ROLL-ON/ROLL-OFF DISCHARGE FACILITY RIGID HULL INFLATABLE BOAT HULL REPAIR INITIAL SETUP: Tools Tool Kit, General Mechanic’s (Item 81, WP 0359 00) Gloves, Chemical (Item 25, WP 0359 00) Goggles, Industrial (Chipping, Chemical) (Item 28, WP 0359 00) Respirator, Air Filtering (Item 59, WP 0359 00) Saw, Jig, Electric, Portable (Item 60, WP 0359 00) Blades, Jig Saw Metal Cutting, Fine Tooth (Item 7, WP 0359 00) Grinder, Pneumatic, High Speed (Item 30, WP 0359 00) Tape, Measuring (Item 74, WP 0359 00) Scissors, Ladies (Item 63, WP 0359 00) Materials/Parts Kit, Fiberglass Repair (18731) PN 100370 Acetone, Technical (Item 1, WP 0358 00) Rag, Wiping (Item 45, WP 0358 00) Disk, Abrasive (Item 17, WP 0359 00) Disk, Sanding, Coarse (Item 18, WP 0359 00) Block, Shoring (Item 6, WP 0359 00) Personnel Required Engineer 88L Equipment Condition RHIB Dry-Docked. REPAIR RHIB HULL - TYPE 3 FIBERGLASS REPAIR WARNING Fiberglass dust is extremely abrasive. Areas near the repair must be covered and protected from fiberglass dust and resin. Respirators, gloves and goggles must be worn at all times. failure to comply may result in injury or death. NOTE Type 3 repairs affect damage to non-cored hull laminate that shows obvious internal damage or damage to nearby structural member. The repair area temperature should be controlled between 50° and 75°F (8° and 20°C) to ensure proper curing of the resins. 1. Prepare damaged area.

Privacy Statement
Press Release
Contact