TM 55-1945-205-24-2
0295 00 2
0295 00
2.
Remove two hex nuts (3) from mounting studs (4).
3.
Remove horn (2) and discard.
INSTALL RIGID HULL INFLATABLE BOAT HORN
1.
Feed horn wiring (1) of new horn (2) through front of control housing (5).
2.
Position new horn (2) onto mounting studs (4).
3.
Install two hex nuts (3) on mountings studs (4). Tighten nuts (3).
4.
Connect wiring (1) and remove tags.
5.
Install RHIB battery negative lead terminal. (WP 0336 00)
6.
Perform operational check of RHIB. (TM 55-1945-205-10-2)
END OF WORK PACKAGE
