TM 55-1945-205-24-2
0296 00 4
0296 00
8.
Disconnect shift control cable (11) from engine (2). (WP 0268 00)
9.
Lift throttle and shift control cables (10, 11) from engine (2) and place on deck of RHIB.
WARNING
10. Install shackle and sling to engine lifting bracket (12).
WARNING
11. Using crane, sling and shackle, tighten sling to support weight of engine (2) during removal.
12. Remove four nuts (13), eight washers (14) and four bolts (15) securing engine (2) to RHIB transom (16).
WARNING
13. Using crane, sling and shackle, remove engine (2) with tilt/trim mechanism attached from RHIB
transom (16).
INSTALL RHIB OUTBOARD ENGINE
WARNING
1.
Using crane, sling and shackle, position engine on the RHIB transom (16).
2.
Install four bolts (15), eight washers (14) and four nuts (13) to secure engine (2) to RHIB transom (16).
Tighten nuts (1).
3.
Remove shackle and sling from engine lifting bracket (12).
4.
Connect shift control cable (11) to the engine. (WP 0268 00)
