TM 55-1945-205-24-2
0302 00 2
0302 00
INSTALL RHIB ENGINE RECTIFIER/REGULATOR
1.
Position new rectifier/regulator (4) so mounting holes align with mounting holes on engine.
2.
Install two mounting bolts (3).
3.
Using a torque wrench, torque mounting bolts to 60 - 84 in. lbs (7 - 9.5 N-m).
4.
Connect the three rectifier/regulator wires (1) to the terminal strip (2) and remove tags.
WARNING
5.
Coat the three wire connections with neoprene coating to seal.
6.
Install RHIB engine cover. (WP 0297 00)
7.
Install RHIB battery negative lead terminal. (WP 0336 00)
8.
Perform operational check of RHIB. (TM 55-1945-205-10-2)
END OF WORK PACKAGE
