TM 55-1945-205-24-4
0116 00 2
0116 00
2.
Remove three screws (2).
3.
Pull wires (1) straight out of circuit breaker (3).
4.
Firmly grasp circuit breaker (3) at the midline of the load bank (4), rotate circuit breaker (3) outward and discard.
INSTALL PERSONNEL SHELTER ELECTRICAL DISTRIBUTION PANEL THREE POLE
CIRCUIT BREAKER
1.
Install the back side of the new circuit breaker (3) into mounting cleats (5).
2.
Rotate circuit breaker (3) onto the midline of the load bank (4) until it snaps into position.
WARNING
3.
Coat wires (1) with dielectric grease.
4.
Remove tags and install wires (1) into circuit breaker (3).
5.
Install three screws (2) and tighten.
6.
Install personnel shelter load distribution panel access cover. (WP 0115 00)
END OF WORK PACKAGE
