TM 55-1945-205-24-4
0137 00 2
0137 00
5.
Remove multimeter negative lead from glow plug threaded case (1).
6.
Remove multimeter positive lead from glow plug terminal (2).
7.
If resistance is not 1.0 - 1.2 W, discard glow plug.
NOTE
The following steps apply to glow plugs with serial numbers 488291 and above.
8.
Set multimeter to measure resistance (W).
9.
Attach multimeter negative lead to glow plug threaded case (1).
10. Attach multimeter positive lead to glow plug terminal (2).
11. Verify a resistance of 0.9 W.
12. Remove multimeter negative lead from glow plug threaded case (1).
13. Remove multimeter positive lead from glow plug terminal (2).
14. If resistance is not 0.9 W, discard glow plug.
END OF WORK PACKAGE
