TM 55-1945-205-24-4
0197 00 2
0197 00
3.
Place wire bundle (7) and wire bundle clamp (8) out of the way.
4.
Remove the nut (9), washer (10) and bolt (11) securing the pintle (12) to the pintle bracket (5).
5.
Remove and discard the pintle (12) and bracket (5).
INSTALL LIGHT TOWER DRAWBAR PINTLE AND BRACKET
1.
Position new pintle bracket (5) on end of drawbar (6).
2.
Install two bolts (4) through the drawbar (6) and pintle bracket (5).
3.
Install wire bundle (7) and clamp (8) on bolt (4).
4.
Install two washers (3) and nuts (2) on bolts (4) and tighten.
5.
Position new pintle (12) against pintle bracket (5).
6.
Install bolt (11) through pintle bracket (5) and pintle (12).
7.
Install washer (10) and nut (9) on bolt (11) and tighten nut (9).
END OF WORK PACKAGE
