MANUALLY UNLOADING BAP TO GROUND (Contd)
When the NO TRANSIT WHEN LIT indicator is
illuminated, the CBT may be maneuvered in the
immediate vicinity of the loading/unloading site, but
should not be driven on the open road. Failure to
comply may result in damage to equipment and
possible injury or death to personnel.
The LHS ENGAGED indicator will light up whenever
the joystick is held in the LOAD or UNLOAD position.
j. Hold joystick (8) in UNLOAD position until LHS hook arm (10) raises BAP
(11) and completes its full movement rearward, then release joystick (8). NO
TRANSIT WHEN LIT indicator (7) will light.
k. Move HIGH IDLE switch (5) to OFF position.
l. Turn LHS MODE SELECT switch (6) to MAIN FRAME ONLY (position 3).
m. Move HIGH IDLE switch (5) to ON position.
n. Hold joystick (8) in UNLOAD position until rear end of BAP (11) contacts
ground, then release joystick (8).
o. Pushing PARKING BRAKE control (12) in.