TM 5-1940-322-24
0024 00
WINDSHIELD WIPER BLADE REPLACEMENT (Contd)
REMOVAL
1. Remove cotter pin (1) from wiper blade holding pin (4) located on wiper arm connector (2). Discard
cotter pin (1).
2. Remove holding pin (4) from connector (2) and wiper blade (3).
INSTALLATION
1. Install new holding pin (4) through connector (2) and blade (3).
2. Install new cotter pin (1) into end of holding pin (4). Spread end of new cotter pin (1).
2
1
3
4
END OF WORK PACKAGE
0024 00-2