TM 5-1940-322-24
0059 00
SEARCHLIGHT AND LIGHT BULB REPLACEMENT (Contd)
SEARCHLIGHT REMOVAL
1.
Disconnect harness plug (7) from receptacle (9).
2.
Remove nut (10), washer (11), screw (13), and handle (12) from searchlight (6).
3.
Unscrew searchlight (6) from mounting base flange (16) and remove searchlight (6) from cab (8).
4.
Remove three locknuts (15), six washers (18), three screws (19), searchlight (6), and gasket (17) from
mounting base (14). Discard locknuts (15). Discard gasket (17) if damaged.
LIGHT BULB REMOVAL
1.
Remove two screws (22), washers (21), spacers (20), trim ring (1), lens (2), and seal (3) from
searchlight (6).
2.
Remove light bulb (5) from light socket (4).
LIGHT BULB INSTALLATION
NOTE
Clean light bulb with dry cloth after installation.
1.
Install light bulb (5) on light socket (4).
2.
Install trim ring (1), lens (2), and seal (3) on searchlight (6) with two spacers (20), washers (21), and
screws (22).
SEARCHLIGHT INSTALLATION
1.
Install searchlight (6) on mounting base (14) and mounting base flange (16) with gasket (17), three
screws (19), six washers (18), and three new locknuts (15).
2.
Screw searchlight (6) on mounting base flange (16).
3.
Install handle (12) on searchlight (6) with screw (13), washer (11), and nut (10).
4.
Connect harness plug (7) to receptacle (9).
0059 00-2
