TM 5-1940-322-24
0060 00
WIRING HARNESS CONNECTOR REPAIR (Contd)
CONNECTOR ASSEMBLY REPAIR
NOTE
Refer to TC 9-237 for soldering instructions.
1.
Strip cable insulation (18) to depth of solder wells (21) on inserts (22).
2.
Slide cable ends (25) through grommet retaining nut (19) and grommet (20).
3.
Place cable ends (25) into solder wells (21) and solder.
4.
Slide grommet (20) over inserts (22) and press into shell assembly (23) until seated.
5.
Screw grommet retaining nut (19) on shell assembly (23) and coupling nut (24) until seated.
6.
Connect battery ground cables (WP 0054 00).
7.
Close battery hatch (TM 5-1940-322-10).
19
20
23
24
22
21
18
25
21 22
RECEPTACLE ASSEMBLY REPAIR
1.
Strip cable insulation (26) to depth of solder wells (30) on inserts (31).
2.
Slide cable ends (28) through grommet retaining nut (27) and grommet (29).
3.
Place cable ends (28) into solder wells (30) and solder.
4.
Slide grommet (29) over inserts (31) and press into receptacle (32) until seated.
5.
Screw grommet retaining nut (27) onto receptacle (32) until seated.
6.
Connect battery ground cables (WP 0054 00).
7.
Close battery hatch (TM 5-1940-322-10).
32
27
29
31
30
26
28
30 31
END OF WORK PACKAGE
0060 00-3/(4 blank)
