TM 5-1940-322-24
0067 00
KEEL COOLER GRATE REPLACEMENT (Contd)
NOTE
There are four keel cooler grates on the hull of the boat. All keel
cooler grates are replaced the same way. This procedure covers the
replacement of one keel cooler grate.
Note position of grates on hull during removal to assist with
installation.
REMOVAL
Remove sixteen bolts (4), lockwashers (3), and grate (2) from hull (1). Discard lockwashers (3).
INSTALLATION
CAUTION
Do not use an impact wrench when installing bolts. Failure to
comply may result in damage to hull.
1. Apply thin coat of antiseize compound to bolts (4).
2. Secure grate (2) on hull (1) with sixteen new lockwashers (3) and bolts (4). Tighten bolts (4) to 25 lb-ft
(35 Nm).
1
~
2
3
4
END OF WORK PACKAGE
0067 00-2
