TM 5-1940-322-24
0069 00
KEEL COOLER INLET PIPE AND OUTLET PIPE REPLACEMENT (Contd)
NOTE
The inlet pipe and outlet pipe for both keel coolers are replaced the
same way. This procedure covers the replacement of the inlet pipe
and outlet pipe for one keel cooler.
REMOVAL
1.
Remove hose (2) from fitting (1).
2.
Remove hose clamps (3) and hose (4) from inlet pipe (12) and thermostat housing (5).
3.
Remove nut (11), screw (6), and two pipe clamps (8) from inlet pipe (12) and outlet pipe (7).
4.
Remove two clamps (3) and tube (13) from outlet pipe (7).
5.
Remove hose clamps (3), tube (10), and inlet pipe (12) from keel cooler fitting (9).
6.
Remove hose clamps (3), tube (10), and outlet pipe (7) from keel cooler fitting (9).
7.
Remove hose clamp (3) and outlet pipe (7) from engine water inlet connection (14).
INSTALLATION
1.
Install outlet pipe (7) and hose (10) on keel cooler fitting (9) with hose clamps (3).
2.
Install outlet pipe (7) on engine water inlet connection (13) with hose clamp (3).
3.
Install inlet pipe (12) and hose (10) on keel cooler fitting (9) with hose clamps (3).
4.
Install tube (13) on outlet pipe (7) with two clamps (3).
5.
Install inlet pipe (12) on outlet pipe (7) with two pipe clamps (8), screw (6), and nut (11).
6.
Install hose (2) on fitting (1).
7.
Install inlet pipe (12) and hose (4) on thermostat housing (5) with hose clamps (3).
8.
9.
Start engine and check for leaks (TM 5-1940-322-10).
10.
Close engine hatches (TM 5-1940-322-10).
0069 00-2