TM 5-1940-322-24
0068 00
KEEL COOLER MAINTENANCE (Contd)
INSTALLATION (Contd)
CAUTION
Install and tighten nuts in order procedure states. Failure to
comply may result in damage to equipment.
5. Install two new gaskets (14), new washers (15), and nuts (16) on posts (12). Do not tighten nuts (16).
6. Install two new gaskets (6), washers (5), and nuts (4) on nozzles (8). Do not tighten nuts (4).
7. Install two new gaskets (18), new washers (19), and nuts (1) on posts (9). Do not tighten nuts (1).
8. Tighten nuts (16) to 5060 lb-ft (67 Nm).
9. Tighten nuts (4) to 70100 lb-ft (54 Nm).
10. Tighten nuts (1) to 3040 lb-ft (135 Nm).
11. Install two hoses (2) on nozzles (8).
12. Tighten two clamps (3) on inlet and outlet hoses (2).
2
13. Install keel cooler grate (WP 0067 00).
3
14. Fill cooling system (WP 0012 00).
15. Start engine and check for leaks (TM 5-1940-322-10).
4
5
6
1
7
19
18
8
16
17
15
~
14
11
9
10
13
12
END OF WORK PACKAGE
0068 00-3/(4 blank)
