TM 5-1940-322-24
0154 00
OIL PAN, SUCTION TUBE, AND SUCTION TUBE BRACKET MAINTENANCE (Contd)
INSTALLATION
1.
Apply coat of gasket forming compound to both sides of new gasket (7).
2.
Install new gasket (7) and suction tube (5) on cylinder block (3) with two screws (6). Tighten screws (6)
to 18 lb-ft (24 Nm).
3.
Install bracket (9) on suction tube (5) and cylinder block (3) with two screws (6), screw (10), and
nut (8). Tighten screws (6) to 18 lb-ft (24 Nm).
NOTE
Apply coat of sealing compound filling the joints between the pan
rail, gear housing, and rear cover.
4.
Apply light coat of gasket forming compound around edge of cylinder block (3) and new gasket (2).
5.
Install new gasket (2) and oil pan (1) on cylinder block (3) with thirty-six screws (4). Tighten
screws (4) to 18 lb-ft (24 Nm).
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
Start engine and check for leaks (TM 5-1940-322-10).
19.
20.
Close engine hatches (TM 5-1940-322-10).
21.
Close battery hatch (TM 5-1940-322-10).
0154 00-4