TM 5-1940-322-24
FIELD MAINTENANCE INSTRUCTIONS
BRIDGE ERECTION BOAT (BEB)
MK II-S
NSN 1940-01-526-0770
P/N 12492423
ENGINE REPLACEMENT
REMOVAL AND INSTALLATION
INITIAL SETUP:
Tools and Special Tools
Materials/Parts (Contd)
Forward Repair System (FRS)
Insulation sleeving, electrical
(item 13, WP 0172 00) or
(item 41, WP 0171 00)Antiseize compound
Common No. 1 tool kit (item 41, WP 0172 00)
(item 6, WP 0171 00)
Sling (item 44, WP 0172 00)
Cap and plug set (item 7, WP 0171 00)
Chains
Personnel Required
Lifting device
Three
Materials/Parts
References
Locknut (item 53, WP 0173 00)
Eight locknuts (item 54, WP 0173 00)
Four locknuts (item 62, WP 0173 00)
Two locknuts (item 60, WP 0173 00)
Equipment Condition
Two locknuts (item 61, WP 0173 00)
Gasket (item 18, WP 0173 00)
Mast lowered and secured (TM 5-1940-322-10).
Lockwasher (item 80, WP 0173 00)
Engine hatches opened and secured
Lockwasher (item 81, WP 0173 00)
(TM 5-1940-322-10).
Two terminals (item 175, WP 0173 00)
Battery ground cables disconnected
Two washers (item 177, WP 0173 00)
Screw (item 176, WP 0173 00)
Engine cooling system drained
Antifreeze (item 5, WP 0171 00)
Tape, pressure sensitive adhesive
Aft cockpit removed (WP 0016 00).
(item 40, WP 0171 00)
0115 00-1
