TM 5-1940-322-24
0156 00
CRANKSHAFT AND CRANKSHAFT GEAR REPLACEMENT (Contd)
CLEANING AND INSPECTION (Contd)
NOTE
The front and rear seal service kits will position the seal slightly
deeper into the seal bore so it will contact the crankshaft at a
different location. Wear sleeves may be required to provide a new
contact surface for the front and rear seals. Wear sleeves are
provided in the service kits.
4.
Inspect front and rear seal contact areas on crankshaft (4) for scratches or grooving. Install wear
sleeves in contact areas if scratches or grooving is present.
5.
Inspect crankshaft (4) for deep scores, signs of overheating, and other abnormal marks. If scarred
deeply, showing signs of overheating, or abnormally marked, use oversized bearings during
installation.
6.
Inspect ring dowel (6) for damage. If damaged, replace ring dowel (6).
4
LIFTING
2
3
DEVICE
1
3
1
6
7
2
5
3
2
4
7
9
8
10
9
3
0156 00-3