TM 5-5420-202-20-2
POWERPLANT TESTS (GROUND HOP) (Sheet 13 of 16)
Stall Test (Sheet 5 of 5)
19. After adjusting servobands, repeat steps 15 through 18. If slippage still existes, notify
support maintenance.
20. When tests are completed, shut down engine (TM 5-5420-202-10).
21. Using 3/4 inch wrench, back off hex head bolt to release brake.
Using 9/16 inch wrench, back off nut to release brake applicator tool from brake housing.
22.
23. Remove brake applicator tool from brake housing.
24. Install right brake slave cylinder (page 13-61).
25. Install left brake slave cylinder (page 13-56).
Go on to Sheet 14
5-37
