TM 5-5420-202-20-2
THERMOSTATIC TRANSMISSION OIL COOLER VALVE ASSEMBLY (LEFT SIDE)
TEST AND REPLACEMENT (Sheet 3 of 7)
REMOVAL:
1.
Place rags or drip pan under tube fittings
(A and B) on transmission.
NOTE
It may be necessary to hold adapters
(C and D) with 1-5/8 inch wrench
while removing tube fittings (AI and
B).
Using 1-1/2 inch wrench, remove tube
2.
fitting (A) from adapter (C).
Place rags or drip pan under tube fittings
3.
(E and F) at oil cooler.
NOTE
It may be necessary to hold adapters
(G and H) with 1-5/8 inch wrench
while removing tube fittings (E and
F).
Using 1-1/2 inch wrench, remove outside
4.
tube fitting (E) from adapter (G).
5.
Move tube (J) aside.
6.
Using 1-5/8 inch wrench, remove adapter
(G).
7.
Using 1-1/2 inch wrench, remove tube
fitting (F) from adapter (H).
Go on to Sheet 4
6-27